bridge processes

[Richardson <F.1.Richardson@herts.ac.uk>]

Dear all...

I am sending this mail in regard to bridge processes...

Some time ago I spent a little time looking at bridge processes...prior
to building my own network straight off I decided to  have  a go at
replicateing the demo project. Upon completion it was obvious that my
replica of the bridge project was not working properly. In order to locate
the source of my error...I checked my networks, environment, processes and
logs. I saved my graph log, my networks and environment independently and
then loaded them into the demo to see if the demo worked using the
networks and environment and graph log I had made. It worked fine... It 
seems that there must be something wrong with the process itself -
however, when I step through the training and  use the update button in
the netview for the second network, the second network seems to be
getting it's input from the hidden layer of the other network as it
should. In the graph log there is a display only for the master
network...any suggestions as to what I have missed would be very
gratefully received.


Regards

Fiona M Richardson